How about floor heating? Is it heating?
With the arrival of winter, floor heating has become the focus of attention for many families. How to judge whether the floor heating is heating normally? This article will extract relevant information from the hot topics and hot content on the Internet in the past 10 days to answer this question for you.
1. How to judge floor heating
1.Check the manifold temperature: There should be a significant temperature difference between the inlet pipe and the return pipe of the floor heating water distributor. The temperature of the inlet pipe is higher and the temperature of the return pipe is slightly lower. If the temperature difference is too small or there is no temperature difference, heating may be abnormal.
2.Observe the ground temperature: In the initial stage of heating, the ground will gradually heat up, and it usually takes 1-2 days to reach a stable temperature. If the ground is not hot for a long time, the problem needs to be investigated.
3.View pressure gauge: The pressure of the floor heating system should be maintained between 1.5-2.0Bar. Too low pressure may result in insufficient heating.
4.listen to the sound of water flowing: During normal heating, there should be a slight sound of water flowing in the pipe. If there is no sound, the pipe may be blocked or the circulation pump may be faulty.
2. Hot topics related to floor heating in the past 10 days across the Internet
| topic | heat index | Main discussion content |
|---|---|---|
| Reasons why the floor heating is not hot | 85 | Pipe blockage, insufficient pressure, circulation pump failure, etc. |
| Floor heating cleaning frequency | 78 | It is recommended to clean it every 2-3 years to avoid pipe blockage |
| Floor heating energy saving tips | 72 | Reasonable temperature settings, regular maintenance, etc. |
| Comparison between floor heating and radiator | 65 | Comfort, energy consumption, installation cost, etc. |
3. Common problems and solutions for floor heating
| question | Possible reasons | solution |
|---|---|---|
| Is the floor warm or not? | Pipe blockage, insufficient pressure, circulation pump failure | Clean pipelines, add pressure, and inspect circulation pumps |
| Not hot locally | Pipe air blockage or partial blockage | Exhaust or spot cleaning |
| Temperature is unstable | Thermostat failure or improper setting | Check thermostat or reset |
4. Precautions when using floor heating
1.Need to warm up slowly for first time use: Avoid floor deformation caused by sudden temperature rise.
2.Exhaust gas regularly: The air in the pipe will affect the heating effect. It is recommended to exhaust it once a month.
3.Avoid covering the ground: Carpets or large furniture will block heat dissipation and affect the heating effect.
4.Set the temperature appropriately: It is recommended that the room temperature be kept at 18-22°C. If it is too high, it will increase energy consumption.
5. Floor heating maintenance suggestions
1.Annual pre-heating inspection: Including pressure, pipelines, circulation pumps, etc.
2.Clean regularly: Prevent pipe blockage and improve heating efficiency.
3.No maintenance required for long term use: It is recommended to maintain it with full water during non-heating seasons to prevent pipe oxidation.
Through the above methods, you can easily determine whether the floor heating is heating properly and solve common problems in time. If the problem cannot be solved by yourself, it is recommended to contact professional maintenance personnel.
check the details
check the details
en
