• Model NO.：WZ-2500A
• Rated Voltage：200kVA*12
• Motor：11kw
• Pulling Mesh Way：Servo Motor Back and Forth
• Control Way：PLC+Touch Screen
• Transport Package：Skecth Film Paper and Wooden Box or Custimzied
• Specification：2500mm,3000mm,3300mm
• Trademark：Wanzhong Machine
• Origin：China
• HS Code：8515219900
• Production Capacity：30sets,Month

Basic Info.

Model NO. WZ-2500A Rated Voltage 200kVA*12 Motor 11kw Pulling Mesh Way Servo Motor Back and Forth Control Way PLC+Touch Screen Transport Package Skecth Film Paper and Wooden Box or Custimzied Specification 2500mm/3000mm/3300mm Trademark Wanzhong Machine Origin China HS Code 8515219900 Production Capacity 30sets/Month

Product Description

Reinforcing Mesh Welding Machine Main Introduction of the Machines:1.This machine cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, separate welding. Surely,if the power supply is enough big,it can also adopt the welding at the same time.
2.Line wires adopt per-cut wires,line wires are put by hand based on the positioning device,then automatic tightening and send the down electrodes by sending line wires car installed with the step motor; When the mesh is being welded, line wires of the next mesh can be placed, which greatly shortens the working interval time of the machine.
3. Cross wires also adopt pre-cut wires,the cross wire hopper obtains wires by motor driver devices, electric magnetic increase feeding device auto-feeding the wefts into the preparation area of the device from the large storing hopper(storage up to 1000kg),it is installed in the removable pulling mesh rack,very convenient to adjust and maintain.
4.Our transformers adopts big power at 200KVA every one,which can ensure the welding quality in good condition and adopt water cooling system,so the machine can work for 24 hours continuously.
5.Pulling mesh way adapts servo motor back and forward according to the setting parameters into the touch screen. Rebar Mesh Welding Machine Main Technical Parameters:

No.	Item	Specification & Description of goods
1	Reinforcing Mesh Welding Machine	A) Wire Diameter :5.0-12.0mm B) Max Mesh Width :2500mm  Max Mesh Length :12000mm C)Cross wire spacing:100-300 mm(Adjustable) Line wire spacing: 100-300 mm(Adjustable) D) Mesh Form Produced : in panel E) Number of Line Wire : 24 F) Welding Speed : max0-60 times/min   G) Power : 200KVA*12  ( transformer with water cooling system ) H)Pulling Mesh Way:pulling mesh back and forward repeatedly by Servo Motor I)Rated voltage:380V 50Hz Three Phase J)Motor:11KW (electromagnetic brake motor) K)Production:25-30 Tons per 8 hours (when the wire dia. is 8.0mm,mesh size 200*200mm) L)Compressed Air Supply:60~80L/min(0.7MPa) M)Cooling Water Supply:144L/min(0.3MPa) N)Welding Way:Resistance Welding Controlled by the Silicon O)Welding Time:10ms~100ms P)Pressure Mode:adjustable spring pressure Q)Line and Cross Wire Feeding Way:both pre-cut wires R)Line Wires Feeding Way:line wires being sent to the down electrodes by the line wire feeding car driven by servo motor after line wires being put by hand S)Cross Wires Feeding Way:falling from the special hopper driven by the step motor Material:black low carbon steel wire or ribbed steel wire Including accessories: Auto line wires feeding device Auto pulling mesh device Water Cooling System All the fitting parts and installing tools and the operating Instructions

Reinforcement mesh welding machine guarantee: two years. Within two years after the date when the goods reach the destination port if the parts (not including easily damaged parts ) are broken for reasons which are not human.Equipment Program part life-long maintenance