• Model NO.：LJ-PCM
• Material：Steel
• Material of Powder Booth：PP,PVC,Plastic
• Color Change Time：10-15min
• Color Recovery Rate：98%
• Specifications：Customized
• Transport Package：as to Customer Requirement
• Trademark：LAIJI
• Origin：China
• HS Code：846330
• Production Capacity：100sets,Year

High Temperature Pre-heating and curing Oven
The body of the high-temperature preheating furnace adopts 200 mm composite silicate rock wool board jointed by the upper and lower cladding angles, which has the characteristics of beautiful appearance, small thermal conductivity and good insulation effect.
The inlet and outlet are equipped with two-way sliding doors to effectively prevent the hot air from spilling out, and the inlet and outlet of the chamber is equipped with an exhaust fan to automatically discharge the exhaust gas from the preheating chamber.
The thermal energy system of the high temperature preheating chamber adopts SUS304 infrared heating tube to rapidly heat the workpiece. The power controller is adopted for the drying group control to automatically heat the workpiece efficiently and reduce the consumption of electric energy to the maximum extent.
 

Dipping Chamber Body
The chamber body is composed of a skeleton, a wall panel, a filter unit for the top layer, a convenient door, a lighting device, a window, a grille, etc.Both sides of the chamber are more than 800mm from the ground to install the lighting glass, the height of the lighting glass is 1000mm, the use of 5mm thick tempered glass, the chamber glass adopts film protection to prevent the pollution of the glass surface, when the paint particles on the glass too much can be replaced with the film.
Product Appliation
Dip coating line is applicable to all kinds of panels, such as Fence panels, Slat fencing, pool fencing, Fence net, Welded Wire Mesh Panel and so on.
Metal mesh is generally installed outdoors, so anti-corrosion is very important. One of the anti-corrosion methods is hot-dip plastic treatment, which is an anti-corrosion treatment method for the frame. It is preheated at high temperature and immersed in the flow of plastic powder. In the chemical bed, the plastic melts and adheres to the surface of the frame to form a plastic anti-corrosion layer. The advantage of this anti-corrosion treatment method is that after the plastic layer, it is not afraid of bumps and the anti-corrosion time is long.
Equipment Structure & Function
                   

Q: What kind of wire can your machine weld?
A: Black wires,iron wires,galvanized wires.

Q:Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang or beijing airport

Q: How many years are your company engaged in the wire mesh machines?
A: More than 30 years. We have our own technology develop department and testing department.

Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.

Q: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.

Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, certificate of origin etc, your customs clearance will be no problem.

If you are interested in our machines, please contact us now,We will provide you with professional and reasonable solutions.